Bill of Materials View BOM
Lightning Protection Installation Training
 
 
 

Course By: Mark S. Harger
President/Owner
Harger Lightning & Grounding
301 Ziegler Drive
Grayslake, IL 60030
Phone: 800-842-7437 or 847-548-8700
Fax: 847-548-8755
Website: www.harger.com

Training Location: Grayslake, IL
THIS IS NOT AN ONLINE COURSE

Attendees are responsible for their own travel and lodging expenses.

 
Number of Participants:
Up to Maximum of 20 (First-come, first-served) Minimum of 6
(Class may be cancelled if minimum requirements are not met)
 
Number of Course Hours:
12
 
Course/Presentation Description:
To review lightning protection design and installation requirements compliant
with nationally recognized standards NFPA 780 and UL 96A.
 
Section 1: Introduction to Lightning Protection : Definition of a lightning protection system and it’s
four main components, Relevant Standards, Materials, UL Markings, Corrosion Protection
 
Section 2: Ground Work : Ground work aspect of a lighting protection system, Key Definitions, Requirements, System Components, Suggested Tools and Critical Points
 
Section 3: Down Conductors & Bonding : Down conductors and related bonding aspects of a lightning protection system,
Key Definitions and Requirements, Techniques and Installation Practices, Critical Points
 
Section 4: Rooftops : Roof Types, Zone of Protection, Components used on rooftops, Suggested Tools, Critical Points
 
Section 5: Concealed Systems : Concealed Systems Installation Guidelines, Structural Steel Systems Installation Guidelines
 
Section 6: Bonding Requirements & Potential Equalization : Bonding of Metal Bodies, Potential Equalization
 
Section 7: Surge Protection Devices : Definitions, Power Service Entrances Requirements, Communications Surge Protection Requirements, Installation Requirements
 
Section 8: Project Management : Bidding Process, Submittal Process, Installation, Certification Process, Maintenance Programs
 
Section 9: UL Listed LP Installer : What it means to be a UL Listed Installer, UL Master Label Certificate, How to Become a UL Listed Installer, Requirements, Fees, Benefits to Using Harger
 




Course Schedule & Enrollment
 
Please submit your request to attend and we will contact you.

Training Start Date
Training End Date
Enroll
Course Information
2/12/2013
2/13/2013
Enroll
3/5/2013
3/6/2013
Enroll
4/2/2013
4/3/2013
Enroll
5/14/2013
5/15/2013
Enroll
6/4/2013
6/5/2013
Enroll
7/9/2013
7/10/2013
Enroll
8/6/2013
8/7/2013
Enroll
9/10/2013
9/11/2013
Enroll
10/8/2013
10/9/2013
Enroll
11/5/2013
11/6/2013
Enroll





Harger's Lightning Protection Installation Class is an approved continuing education course in the electrical field by several states. By attending, electricians licensed in these states can earn hours necessary for license renewal. Harger submits all paperwork to the state and covers all fees associated with license renewal. To receive continuing education hours, please bring the electrician license to class for processing.

 • Alaska (4 hours)
 • Delaware (10 hours)
 • BICSI (11 hours)
 • Florida (12 hours)
 • Iowa (12 hours)
 • Minnesota (4 hours)
 • Montana (12 hours)
 • Nebraska (12 hours)
 • Nevada (12 hours)
   (Clark County)
 • New Mexico (12 hours)
 • Ohio (10 hours)
 • South Dakota (12 hours)
 • Utah (12 hour or 6 hours)
 • Washington (12 hours)
 • Wisconsin (12 hours)
 • Wyoming (12 hours)
 • Other States Pending