Ultraweld® Exothermic Connections » Cable and Work Surface Preparation

Home » Ultraweld® Exothermic Connections » Materials, Tools & Accessories » Cable and Work Surface Preparation

	Cable and Work Surface Preparation

Card Cloth Brush

	Part No.	Qty.	Approx. Wt. Each (lbs.)
Add to BOM ◆	CCBRSH1	EA	1/4

◆ BOM = Bill of Materials

• The Card Cloth Brush has short, stiff, metal bristles which are generally
preferred for cleaning concentric conductors and bus bars, that are not
heavily oxidized.

Cable Cleaning Brush

	Part No.	Description	Qty.	Approx. Wt. Each (lbs.)
Add to BOM ◆	CCBRSH2	Cable Cleaning Brush	EA	1-1/2
Add to BOM ◆	CCBRSH2R	Replacement Brush	EA	1/2

◆ BOM = Bill of Materials

• Ideal for cleaning concentric stranded cable, especially very dirty or oxidized conductors.

Cold Galvanizing Spray

	Part No.	Qty.	Approx. Wt. Each (lbs.)
Add to BOM ◆	CGS	EA	1

◆ BOM = Bill of Materials

• Cold Galvanizing Spray is used on galvanized steel surfaces to touch up heat affected areas after welding.
• The repair is often cosmetic due to minimal damage that may occur to the galvanized surface.
• CGS available in 16 ounce aerosol can.

Rasp

	Part No.	Qty.	Approx. Wt. Each (lbs.)
Add to BOM ◆	RASP	EA	7

◆ BOM = Bill of Materials

• Ideal for removing mill scale and rust from steel surfaces.