Bill of Materials View BOM
Exothermically Welded Pedestal Connections
Exothermically Welded Pedestal Connections

Mold Part No. Connection Weld Metal Handle Clamp
Add to BOM ◆ VHO61SQMX #6 Conc. to 1" Sq. Pedestal US25 - MH4
Add to BOM ◆ VHO61SQMX #6 Conc. to 1" Sq. Pedestal - NUWTUBE25 MH4
Add to BOM ◆ BCF61.5016B #6 Conc. to SRG US25 - MH1
Add to BOM ◆ BCF61.5016B #6 Conc. to SRG - NUWTUBE25 MH1
◆ BOM = Bill of Materials
• For low smoke requirements, a USSXKIT is required to convert standard
UltraShot molds into low smoke-no flame molds using UltraShot weld metal only.

Pedestal Bonding to SRG
Connect pedestals per specification, typically every 6th in each direction, to the SRG using
#6 AWG 7 strand copper cable. The cable should take the shortest path between the pedestal
and the SRG. The length of the wire should not exceed 2 feet. The bond wire can either be
exothermically welded to the pedestal (preferred method) or mechanically attached using a UL
Listed Pedestal Ground Clamp.

According to Directive: 2002/95/EC, 2011/65/EU (RoHS 2)
Exothermically Welded Pedestal Connections
To whom it may concern,

The above part is hereby certified to be in compliance of the European directive 2002/95/EC, 2011/65EU or its exemption(s) for restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2).

301 Ziegler Dr
Grayslake, IL 60030