Bill of Materials View BOM
Class I Aluminum Conductors
UL Logo Listed 96
Class I Aluminum Conductors

Part No. No. of
Strands
Strand
Size
X-Sectional
Area in CM
Diameter Wt.
lbs./M ft.
Reel/Coil
Size
Reel/Coil
Wt. (lbs.)
Add to BOM ◆ A24-25COIL 24 14 AWG 98,600 7/16" 95 25' 2-1/2
Add to BOM ◆ A24-50COIL 24 14 AWG 98,600 7/16" 95 50' 5
Add to BOM ◆ A24-100 24 14 AWG 98,600 7/16" 95 100' 13
Add to BOM ◆ A24-250 24 14 AWG 98,600 7/16" 95 250' 28
Add to BOM ◆ A24-500 24 14 AWG 98,600 7/16" 95 500' 56
Add to BOM ◆ A28-25COIL 28 14 AWG 115,000 1/2" 112 25' 3
Add to BOM ◆ A28-50COIL 28 14 AWG 115,000 1/2" 112 50' 6
Add to BOM ◆ A28-100 28 14 AWG 115,000 1/2" 112 100' 13
Add to BOM ◆ A28-250 28 14 AWG 115,000 1/2" 112 250' 33
Add to BOM ◆ A28-500 28 14 AWG 115,000 1/2" 112 500' 66
◆ BOM = Bill of Materials
• All dimensions and weights are approximate.



These conductors are intended for use on structures
up to and including 75' in height.



• Class I lightning conductors are manufactured using a special rope lay process. This process
maximizes the surface area of the conductor while allowing greater installation flexibility.
• Class I Minimum Requirements:
- 95 pounds per 1,000 feet.
- Cross-sectional area of 98,600 circular mils.
- Minimum strand size 14 AWG.
• Conductors are marked in 3' intervals to aid in installation.



CERTIFICATE OF RoHS COMPLIANCE
According to Directive: 2002/95/EC, 2011/65/EU (RoHS 2)
Class I Aluminum Conductors
To whom it may concern,

The above part is hereby certified to be in compliance of the European directive 2002/95/EC, 2011/65EU or its exemption(s) for restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2).

Harger
301 Ziegler Dr
Grayslake, IL 60030
847.548.8700